If you see the error in your DFE or in the press controller do the following:
- Close Navigator Client
- Close Navigator Server (Wait for application to close completely before next step)
- Shut down power to the duraflex cabinet at the power switch (Green for US and Red for International)
- Wait 60-120 seconds
- Turn power back on to cabinet
- Wait roughly 3 minutes
- Relaunch Navigator application (Launcher Icon)
- Click "Press Control" in the spooler window
- Click "Initialize" and wait for system to return to "Prime Idle"
If the above steps did not fix your issue, please submit a support ticket.
Related Articles
Firejet 4C - DHCP Server setup
First check if the navigator applications are showing a connection to the Duraflex module. If the "Press Controller" is showing "Not Connected" then open a new command prompt and ping 192.168.100.200 If there is no response, then open up the DHCPSRV2 ...
Data Underrun - Firejet 4C - Reinstall Drivers
If you have an error being displayed in the press controller or the DFE stating "Data Underrun" please follow the steps below to fix the issue. 1. Right click the windows start menu and select the "Device Manager". 2. Expand the "Network Adapters" ...
Firejet Domain Account - Xitron Reinstallation
Exact Steps: 1. Used Backrest to create a backup 2. Manually made a copy of the entire Navigator folder 3. Made a manual copy of the APPDATA/Xitron folder 4. Made a manual copy of the PROGRAMDATA/Xiton folder 5. Ran the Installer ...